-
Embedded Computing -
Digital Signal Processors -
FPGA Processors -
- Virtex-5 FPGA - -
VPX - 4x V5 -
VPX 2xV5 & 2xPowerPC -
VPX - 2x V5 & PowerPC -
VXS - V5 & PowerPC -
PCI - V5 Digital IO -
PMC - V5 Digital IO -
XMC - V5 Analog 1.5GS -
XMC - V5 Analog 3GS -
- Virtex-4 FPGA - -
VPX - V4 for DSP -
VPX - V4 for Logic -
VXS - V4 for DSP -
VXS - V4 for Logic -
VXS - V4 IO Controller -
PMC - V4 Logic Node -
PMC - V4 DSP Node -
PMC - V4 Dual Logic -
- Virtex-II Pro - -
PMC - V2Pro Digital IO -
VXS - V2Pro & PowerPC -
PMC - V2Pro Fiber IO -
3U - V2Pro & PowerPC -
- Tools - -
FPGA Resources -
FPGA Toolkit
-
-
Single Board Computers -
Switch Cards -
Digital I/O -
Analog I/O -
Fiber Optic I/O -
Carriers -
Buffer Memory Nodes -
Ethernet -
Chassis -
Software -
IP Cores -
Mature Products
-
-
Data Recording & Storage -
Protocol & Bus Analyzers -
Network Storage
Related Products:
- MM-6170F - 128MB Non-Volatile Solid State FLASH PMC
MM-6170FT
- Capacity: 64MB or 128MB Non-volatile Flash
- Operating Temp: -40 C to 71 C
- Compatible with PMC Local Bus Specification Rev 2.1
- Conformal Coated
- 5V @ 1.2A
- Optional True Flash File System (TrueFFS™) driver for VxWorks® Tornado® OS
The MM-6170FT is a conduction cooled, conformally coated 32-bit/33MHz FLASH PMC (PCI Mezzanine Card) with an operating temperature of –40 C to 71 C. The card has been designed with extended temperature devices and board stiffeners.
The MM-6170FT can easily provide NVRAM expansion memory on cards with PMC sites. The card is capable of being both a target memory and a DMA initiator in order to maximize throughput. NOR FLASH technology provides 20 year data retention and up to 100,000 write/erase cycles.
The MM-6170FT includes board stiffeners and extended temperature devices which enable it to operate in harsh, high vibration environments within a temperature range of -40 C to +71 C.
Reliability is ensured by burn-in and running memory diagnostics that check operations for 96 hours while temperature-cycling boards from –40 C to 71 C.
RSS