|
Embedded Computing |
|
Digital Signal Processors |
|
FPGA Processors |
|
|
- Virtex-5 FPGA - |
|
|
VPX - 4x V5 |
|
|
VPX 2xV5 & 2xPowerPC |
|
|
VPX - 2x V5 & PowerPC |
|
|
VXS - V5 & PowerPC |
|
|
PCI - V5 Digital IO |
|
|
PMC - V5 Digital IO |
|
|
XMC - V5 Analog 1.5GS |
|
|
XMC - V5 Analog 3GS |
|
|
- Virtex-4 FPGA - |
|
|
VPX - V4 for DSP |
|
|
VPX - V4 for Logic |
|
|
VXS - V4 for DSP |
|
|
VXS - V4 for Logic |
|
|
VXS - V4 IO Controller |
|
|
PMC - V4 Logic Node |
|
|
PMC - V4 DSP Node |
|
|
PMC - V4 Dual Logic |
|
|
- Virtex-II Pro - |
|
|
PMC - V2Pro Digital IO |
|
|
VXS - V2Pro & PowerPC |
|
|
PMC - V2Pro Fiber IO |
|
|
3U - V2Pro & PowerPC |
|
|
- Tools - |
|
|
FPGA Toolkit |
|
Single Board Computers |
|
Switch Cards |
|
Digital I/O |
|
Analog I/O |
|
Fiber Optic I/O |
|
Carriers |
|
Buffer Memory Nodes |
|
Ethernet |
|
Chassis |
|
Software |
|
IP Cores |
|
Mature Products |
|
Data Recording & Storage |
|
Protocol & Bus Analyzers |
|
Network Storage |
The RS485-MOD2 is a front panel mezzanine module designed to provide serial I/O functionality to VMETRO's FPGA-based processing PMC modules. This module provides 33 channels of EIA-485/422B serial I/O. The RS485-MOD2 is aimed at embedded application development.
The RS485-MOD2 is designed to be used with:
| - PMC-FPGA05 | A Virtex-5 LX110 FPGA based PMC |
| - DEV-FPGA05 |
A Virtex-5 LX110 FPGA based PCI board |
| - PMC-FPGA03 |
A Virtex II Pro XC2VP50 FPGA based PMC |
RS485/422
The RS485-MOD2 provides 33 channels of RS485 serial I/O; each channel can be configured as an input or output. Fully compliant onboard drivers allow either EIA-485 or EIA-422B to be supported. A single 68-way VHDCI (SCSI-5 style) connector provides access to the signals using a pin configuration that allows standard differential SCSI-5 cables to be used [only SCSI-5 cables fabricated with all 34 differential signals routed through twisted pairs should be used]. This simplifies use and minimizes cost. Serial protocols and timings are handled by the host FPGA.
Software
The RS485-MOD2 is hosted by the PMC-FPGA03, PMC-FPGA05 or DEV-FPGA05 which are supported under Windows XP, VxWorks and Linux (Contact VMETRO for availability). The RS485-MOD2 support package is additional to the BSP that accompanies VMETRO PMC modules and includes:
Development of VHDL code for the FPGA requires synthesis tools such as Xilinx Foundation.